Professional Pressure Washing & Driveway Cleaning Across London
Years of London rain, tree sap, and city grime turn once-bright driveways and patios into slippery, moss-covered surfaces. Our pressure washing teams use professional-grade equipment and surface-specific techniques to strip away years of buildup, restoring the original colour of your paving, decking, or exterior walls without causing damage.
Enquire for Pressure Washing
Skip the back-and-forth! Enter your London postcode below and launch WhatsApp with a pre-filled enquiry for our fastest response.
How We Deliver Pressure Washing in London
We use industry-leading machinery, accredited safe chemicals, and meticulous inspection protocols for exceptional results.
1. Surface Assessment & Technique Selection
Identifying stone, block paving, decking, or render so the correct pressure and nozzle are used for each surface.
2. Pre-Treatment & Moss Removal
Biocide treatment applied to heavily mossed or algae-covered areas and left to work before washing.
3. Full Pressure Wash
Systematic high-pressure clean across the whole area, removing embedded dirt, oil marks, and organic growth.
4. Joint Sanding (Block Paving)
Re-sanding paving joints where sand has washed out, restoring a finished look and reducing weed growth.
5. Optional Sealing & Handover
A protective sealant can be applied to slow regrowth, followed by a full walk-through of the finished area.
What is Included in Every Clean:
- ✓Driveways: block paving, tarmac, concrete and gravel edging
- ✓Patios: natural stone, slabs and composite surfaces
- ✓Decking: gentler low-pressure technique to avoid splintering
- ✓Moss and algae biocide pre-treatment
- ✓Block paving joint re-sanding
- ✓Optional protective sealant to slow regrowth
Pressure Washing FAQs
Will pressure washing damage my patio or driveway?
Not when the pressure and nozzle are matched to the surface. Natural stone, block paving, and timber decking all need different settings, which is exactly why we assess the surface before starting rather than using one setting for everything.
Do you use chemicals on the driveway?
A biocide treatment is used on heavily mossed or algae-covered surfaces to lift growth that pressure alone won’t remove. It is applied carefully and rinsed as part of the process.
How long will my driveway stay clean afterwards?
It depends on shade, drainage, and weather exposure — a shaded, damp driveway will regrow moss faster than one in full sun. A protective seal after washing noticeably slows this down.
London Mobile Units Ready
Our specialist cleaning teams operate throughout Central, North, South, East, and West London every day from 7am to 8pm.
We Provide Pressure Washing in Every London Postcode
FindMyCleaner serves every residential street, apartment complex, and commercial building across London. Browse all postcode coverage areas below or search your exact area:
Monument, Tower Hill, Aldgate, Fenchurch Street, Leadenhall
Fleet Street, St Paul's, Blackfriars, Mansion House, Temple
Bloomsbury, High Holborn, Kings Cross, Gray's Inn, Russell Square
Covent Garden, Holborn, Strand, Leicester Square, Charing Cross, Aldwych
Mayfair, Marylebone, Soho, Fitzrovia, Harley Street, Oxford Street, Piccadilly
Westminster, Belgravia, Pimlico, Victoria, St James's, Sloane Square
Waterloo, Southwark, London Bridge, Bermondsey, Borough, Bankside, Elephant & Castle
Whitechapel, Spitalfields, Brick Lane, Aldgate East, Wapping, Stepney
Canary Wharf, Isle of Dogs, Docklands, Limehouse, Poplar, Blackwall
Royal Docks, Canning Town, Silvertown, Excel, London City Airport
Need Pressure Washing in Your London Area?
We have mobile London vans ready for dispatch today. Get an instant quote via WhatsApp or call our support line.
Pressure Washing in London
London’s weather does a lot of quiet damage to outdoor surfaces. Rain that never quite dries out in shaded corners, tree sap, traffic grime and airborne pollution combine to grow moss and black algae on driveways, patios and decking, usually so gradually that it is only obvious once the whole surface has darkened.
Pressure washing removes that buildup mechanically, using controlled high-pressure water rather than scrubbing or harsh chemicals. The key word is controlled — the pressure and nozzle that work on concrete would damage timber decking, and what lifts algae from block paving is not what a natural stone patio needs. We match the technique to the surface rather than using one setting for everything.
What pressure washing covers
Driveways & paths
- Block paving, tarmac, concrete and gravel edging
- Oil stains and tyre marks where possible
- Weed and moss removal from paving joints
- Joint re-sanding once paving is clean and dry
Patios & decking
- Natural stone and slab patios
- Timber decking, using a lower-pressure, wider-fan technique
- Composite decking cleaned to manufacturer-safe settings
- Moss and algae biocide pre-treatment where growth is heavy
Walls & exteriors
- Render and brickwork spot cleaning
- Exterior steps and entranceways
- Bin storage areas and side passages
- Optional protective sealant to slow regrowth
How it works
- 1
Surface assessment
We identify the exact surface — stone, block paving, decking or render — so the right pressure and nozzle are used.
- 2
Pre-treatment
Heavily mossed or algae-covered areas get a biocide treatment first, left to work before washing.
- 3
Pressure wash
A systematic pass across the full area removes embedded dirt, organic growth and staining.
- 4
Finishing touches
Block paving joints re-sanded, and an optional protective seal applied to slow how quickly moss returns.
What affects the price
Pressure washing is priced by area and surface condition rather than a flat rate, since a lightly soiled patio and a heavily mossed driveway that hasn’t been touched in years are very different jobs.
- Total area in square metres
- Surface type — decking needs a gentler, slower technique than stone or concrete
- How much moss and algae buildup there is
- Access for equipment and hoses
- Whether joint sanding or protective sealing is wanted